CAME ÖZAK Road Blocker

Description

CAME ÖZAK Road Blocker

TECHNICAL FEATURES

Power Standard 380V AC 3-Phase 50/60 Hz, 3.3 – 5.5 KvA motor (varies depending on blocker size).

Opt. 220V, 110V 1-Phase 50/60 Hz (for some models/sizes only), optionally 24V DC for emergency situations in case of power failure.

Control Pack

24V DC powered and PLC control unit is placed in power unit cabinet.
Solenoids 24V DC (Ops.12V DC / 220V AC)

Speed

Standard Operation ~4 – 6 sec. (ascend/descend) (opt. 2.5 – 4 sec.) depending on unit dimensions.
Emergency raise up (upwards) by optional hydraulic accumulator ~1.5 sec. and may vary depending on unit dimensions.

IP Rating IP 55 – Hydraulic Power Unit,
IP 67 – Electronics (optional), protection with housing/box
IP 68 – Hydraulic Piston

Crash / Impact Rating
Designed and produced to withstand M40 P1 (K-8).

TECHNICAL FEATURES (continued)

Battery Back-up for Power-off Situation Battery unit with capacity of min. 100 movements (50 deploy + 50 retract) when fully charged is optionally available.

Axle Load

Resistance 40T

Hydraulic Cylinder

Unit Heavy duty, dust sealed electrostatic powder coated hydraulic cylinder. Models between 1- 4 metre widths contain a single piston. (Double piston versions are optionally available for models with 4 metre widths).
Models between 4.5 – 6.5 metre widths contain double pistons. Cylinder unit features a safety valve against leakage and hose failure.

Hydraulic Power Unit

Strengthened industrial pump, 40-120 lt oil tank capacity with magnetic metal collector and particle filter, Built-in oil level and temperature indicator, 70-80 Bar pressure; maximum running pressure is 120 Bar
10 mt R2 (double wire braided mesh) reinforced hydraulic hose.

System

Down, Up, Emergency and external sensor inputs/outputs (e.g. loop detector, beam detector, Signalisation, Remote Control, etc.) System alerts with an audio signal during lowering and raising operation.
A loud siren output in case of alarm or emergency. Can be lowered or raised automatically in case of emergency (User’s preference). Can be lowered and raised manually in case of power failure or during the maintenance service with manual pump and manual valve feature. Automatic raise up mode deploys (optionally with synchronised loop detector) the road blocker after the vehicle has passed over.
Sensor controlled stopping both at the top and bottom positions of the blocker unit

Power Unit

Motor, hydraulic pump and solenoid valves are contained in an easily accessible hot-dip-galvanised and electrostatic powder painted cabinet with a built-in lock lid. (Opt. Stainless Steel Cabinet)
Cabinet Dimensions: 1000 x 570 x 1200 mm (W x L x H).

Blocker Cabinet (underground unit)
All parts are coloured with industrial paint with two components. U-shaped profile structure for maximum strength. The blocker and cabinet are designed so that no vehicle crashing effect can displace it after embedded or installed into the ground.

Blocker Unit (impact blocking unit)
All parts are coloured with industrial paint with two components. Hot dip galvanised vehicle pass through surface (top plates). The construction is aesthetically and functionally completed with reflecting strips and warning signs. The hinge system is specially designed to have a flattened surface level with the top plate so that vehicles can pass over smoothly and quietly. Top panel where the vehicle pass over is made of 8/9mm thick non-slip surface steel hot-dip galvanised before paint. The system moves up and down with 50mm diametre stainless steel hinges (example: 3 metre blocker contains 7 pieces of 50mm diameter stainless steel hinges). Blocker unit raises 45° angle from the ground level and can be equipped with optional flashing light indicators on side and front panels. A top lid is provided for easy access for service and maintenance on the top plate.

Control System

Manual Control Button Unit:
Provided with an IP67 CRM yellow box including 3 switches for downwards, upwards, stop (optional emergency operation), can stop the
blocker motion with the command/signal coming from detector, equipped with built-in LED visual indications.

Compatibility with Access Control Systems:
Compatible with any access control system (by third parties).

Optional Unit:
With the optional model “RB CONT.UNIT.V.001” users can monitor the diagnostic functions, can be accessed through LAN, RS485 protocols. System is provided inside a metal cabinet that also includes the other functional switches like downward, upward, stop, emergency operations. With the built in 124×68 LCD screen, all status of the operation and system diagnostic can be monitored through messaging functions like
oil status, loop or beam detectors status, water level inside the cabinet, blocker position according to user preference, any .bmp files can be displayed. The system is driven by the PLC.

Optional Featuresand Accessories

Traffic lights (red-green), traffic light pole, loop detector (double/single contact), beam detector, 220V, 110V motor, 24V DC for emergency situations in case of power failure, remote control (receiver and transmitter are 3 channels), UPS, photocell sensor (receiver + transmitter with 50cm height pole), RB CONT. UNIT.V.001 control unit, intercom, external buttons, emergency submersible pump, hydraulic accumulator for emergency fast raise up (1 piston or 2 pistons systems), surface frame (sizes: from 250mm to 1000mm), oil cooler, oil heater, heater for electronic components, hot-dip galvanisation for cabinet, blocker and impact surface units, double effect hydraulic unit, double speed hydraulic unit, ground mounting plate, powered audio signal (siren), PLC diagnostic monitor, flashing light indicators, round shaped front
panel, oil level sensor, optional speed, IP67 box (for PLC, SMPS, connectors etc inside power unit).

Installation

Easy Installation with C30 grade concrete and steel rebar reinforcement.

To see our full range of Access Controls click here