AES E-loop Commercial Presence with I-GATE PLUS

Description

AES E-loop Commercial Presence with I-GATE PLUS

PRESENCE MODE MODE

Get more out of the e-Loop by connecting the e-Trans plus plug-in. This device plugs into our latest I-gate unit the I-Gate-Plus, which gives the user extra features.

•Set auto relay times.
•Set do not disturb times.
•SMS low battery notification.
•Set e-Loop lock-outtimes.
•Program mode.

AES E-loop Commercial Presence with I-GATE PLUS Includes

1 x e-Loop commercial Presence mode.
• 1 x e-Trans-Plus (Plug in).
• 1 x I-Gate-Plus.
• 2 x Concrete fixing bolts.

Introducing a new concept in wireless vehicle detection. The e-Loop replaces traditional wired inductive loops, saving time and money while increasing reliability.

The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles.

These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.

The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilises two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latchedand confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, confirmation mode.

Installation in 3 simple steps
1. Code in the e-Loop
2 .Secure the e-Loop to the driveway
3. Calibrate the e-Loop… and you’re ready to operate in less than 15 minutes.

Features

• Quick and easy installation.
• Not effected by ground movement.
• High security 128 bit encryption.
• Range 50 metres/yards.
• IP68.

• Dual sensor technology.
• Magnetic field and Radar detection.
• Compact profile –only 28mm high x 220mm diameter
•10600 mA battery giving up to 10 years battery life.
• Made of high-impact plastic (10 tonne static load limit).

The AES IGate Plus is packed with the below features

• 1200 Numbers for caller ID access
• Trigger, latch and unlatch gates by SMS or with app
• Auto call feature to schedule outgoing call (prevents SIM card being deactivated)
• Activity log feature
• Includes 7 day time clock.
• Check stored numbers by SMS.
• 1 Volt free momentary relay output
• Check relay status
• SMS passcode access for non stored numbers
• Store up to four phone numbers to receive SMS alerts each time the unit is used to grant access.
• Program times for the relay(s) to operate automatically.

For our full range of Induction Loops Click Here

For more information from the manufacturer please click here

FREE UK Mainland delivery on all orders over £100! Contact us about shipping to Ireland or Northern Ireland.