AES E-loop Inground with LCD Transceiver Presence

Description

AES E-loop Inground with LCD Transceiver Presence

Presence MODE

The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles.

These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.

The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilises two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, confirmation mode.

AES E-loop Inground with LCD Transceiver Presence includes

• 1 x e-Loop inground Presence mode wireless detection module.
• 1 x LCD transceiver (Trans-200).
• 2 x Dyna bolts.
• 1x Magnet.

Introducing a new concept in wireless vehicle detection. The inground e-Loop replaces traditional wired inductive loops, saving time and money while increasing reliability.

Installation in 3 simple steps

1. Code in the e-Loop.
2. Core bore 89mm hole 70mm deep and secure using flexible mastic.
3. Calibrate the e-Loop… and you’re ready to operate in less than 30 minutes.
Save many hours of installation time compared to wired loop systems.

Features

• Dual sensing technology
• High security 128 bitencryption.
• Quick and easy installation.
• Recesses into the driveway.
• Not affected by ground movement.
• 14500 mA battery giving up to 10 years battery life.
• Top access for changing battery.
• Up to 50 metres range.

E-TRANS 200 Single Channel Receiver (included in kit)

Introducing a bidirectional wireless access control system for gate and door applications.
With a unique lock-out function, this high-end accessory is designed to manage access control for commercial multi-unit complexes with up to 200 units, with functions also suitable for home systems.

Features

• Simple to use menu functions with LCD display.
• High sensitivity 433 MHz -126 dBm receiver with 20 dBm Transmission output.
• External SMA connector to allow for the connection of different antennas.
• Wide input voltage range from 10V to 36V ACDC.
• 2 relay outputs with the ability to set to Pulse, Hold or Latch mode.
• Selectable ultra-low standby power consumption of only 4.5 m/a making it ideal for solar applications.
• 200 code storage with remote ID selection making it ideal for unit applications.
• Ability to delete individual remote devices.
• Unique lock-out feature allowing you to lock out entry buttons, e-Loops and keypads using the lock and unlock function on the e-Remote.
• Ability to connect to the e-Loop to access menus and change settings.
• Test mode which allows you to test relay outputs, radio signal strength and radio interference.

For our full range of Induction Loops Click Here

For more information from the manufacturer please click here

FREE UK Mainland delivery on all orders over £100! Contact us about shipping to Ireland or Northern Ireland.