AES E-loop Inground Commercial Kit PRESENCE

Description

AES E-loop Inground Commercial Kit PRESENCE

PRESENCE MODE

The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles.

These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.

The Radar sensors can detect vehicles that are stopped above the e-loop. The added radar utilises two-way radio communication protocol for reliable operation. Once the magnetometer sensor detects an oncoming vehicle, the transceiver relay will be latched and confirmation will be sent back to the e-loop. If the magnetic field drops below the set threshold, the radar will check if a vehicle is present. If no vehicle is detected, an unlatch command is sent to the relay, and the transceiver will send a confirmation to the e-loop. If the confirmation is missed, multiple attempts will be made to ensure A safe operation. Radar settings can be adjusted using the e-diagnostics remote. Settings that can be changed include; Dead zone, sensor distance, sensitivity, magnetic field release level, confirmation mode.

AES E-loop Inground Commercial Kit PRESENCE includes

• 1 x e-Loop inground Presence mode wireless detection module..
• 1 x single channel transceiver (Trans-50)
• 1 x Magnet
• 2 x Dyna bolts.

Introducing a new concept in wireless vehicle detection. The inground e-Loop replaces traditional wired inductive loops, saving time and money while increasing reliability.

Installation in 3 simple steps

1. Code in the e-Loop.
2. Core bore 89mm hole 70mm deep and secure using flexible mastic.
3. Calibrate the e-Loop… and you’re ready to operate in less than 30minutes.
Save many hours of installation time compared to wired loop systems.

Features

• Dual sensing technology. (EL00IG-RAD only)..
• High security 128 bitencryption.
• Quick and easy installation.
• Recesses into the driveway.
• Not affected by ground movement.
• 14500 mA battery giving up to 10 years battery life.
• Top access for changing battery.
• Up to 50 metres range.

E-TRANS 50 Single Channel Receiver (included in kit)

Introducing a bidirectional wireless access control system for gate and door applications.

Featuring a compact design with exceptional range, the e-Trans-50 is designed to manage access control for home and commercial systems.

Features

• Compact design with exceptional range.
• SMA connector for standard for optional long-range antenna connection.
• Wide Voltage Range: 10-36V DC.
• Exceptionally low Current draw: standby 4.5 m/a, active 30 m/a.
• Frequency: 433.39 MHz.
• Remote storage: 50 remotes, 4 x e-Loops, 4 x Keypads, 4 x Entry Buttons.
• Relay: 1-amp contact rating, COM and N/O connections x 1 relay.
• Multiple Modes: Pulse, Latch and Hold.

For our full range of Induction Loops Click Here

For more information from the manufacturer please click here

FREE UK Mainland delivery on all orders over £100! Contact us about shipping to Ireland or Northern Ireland.